FSP Knight KN-1101TS Series 1-phase Online UPS / Tower/ 1KVA/ Internal 36V Battery/STD model/3PC7AH Bat, IEC, USB/RS232, INTSLOT, Ext Bat connector

FSP FP-800 Tower Line interactive Series / Single phase/Single phase/Line-Interactive/800VA/IEC *4 + USB + USB cable

FSP AGA 600 / stand-by type/Single phase/600 VA (360W active)/6 EU plugs (3 backed up)/ Led/Sound/Cold Start

FSP FP-600 Tower Line interactive Series / Single phase/Single phase/Line-Interactive/600VA/ IEC *4 + USB + USB Cable

FSP Knight KN-1103TS Series 1-phase Online UPS/ Tower/ 3KVA/ Internal 72V Battery/ STD model/6PC9AH Bat, IEC, USB/RS232, INTSLOT, Ext Bat connector

General Properties Product Code TSK5306 EAN Code 8697842805560 Series description Newtech Pro II Product description Newtech Pro II 2 kVA Capacity / Power 2 kVA / 1800 W Display LCD Panel Alarm Battery mode, Low battery, Over load, Error Input Nominal voltage 200 / 208 / 220 / 230 / 240 VAC Voltage range Low voltage transfer @100%-80% load 160 VAC ±5%, @80%-70% load 140 VAC ±5%, @70%-60% load 120 VAC ±5%, @60%-0% load 110 VAC ±5%, (<35°C) Voltage range Low voltage back transfer @100%-80% load 175 VAC ±5%, @80%-70% load 155 VAC ±5%, @70%-60% load 135 VAC ±5%, @60%-0% load 125 VAC ±5%, ( 110% transfer to by-pass in 3sec Current crest ratio 3/1 max Harmonic distortion ≤3% THD (linear load)  ≤6% THD (non-linear load) Transfer time Line Battery 0 msec Transfer time Inverter By-pass 4 msec (typical) Waveform (Battery mode) Pure sinewave Efficiency Line mode ~ 89% Battery mode ~ 87% Battery Type of battery 12V9AH Number of battery 4 Charge time Depends on external battery capacity Charge voltage 54.7 VDC ± %1 Charge current 1A Indicators & Alarm LCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, Fault conditions Alarm Battery mode, Low battery, Overload, Fault Dimensions & Weight D x W x H (mm) 399 x 144 x 209 Net weight (kg) 16.2 Environmental Operating temperature 0-40°C Humidity 20-90% RH (non-condensing) Noise level (audible) < 50 dBA, from 1m Management Smart RS-232 or USB Windows 98/2000/2003/XP/Vista/2008, Windows 7/8, Linux, MAC SNMP (Optional) Power management from SNMP manager and web browser Important Note Note Tuncmatik Inc. has the right to make changes without notice by the above features.Tuncmatik Inc. It is not responsible from the typographical errors.

TSK1309-TUNCMATIK KOMTECH INCREASED BACKUP MODULE/UPS

GENERAL SPECIFICATIONS • 650VA / 1000VA / 1500VA / 2000VA line interactive UPS • Built-in super smart charger, shorten 50% of charging time • Excellent microprocessor control guarantees high reliability • Boost and buck AVR for voltage stabilization • Auto restart while AC is recovering • Simulated sine wave output • Off-mode charging • Cold start function • Optional USB/RS-232 communication port and RJ-11/RJ-45 protection • Offering LED and LCD panels for selections TECHNICAL SPECIFICATIONS MODEL Leo 2000A Capacity 2000VA / 1200W INPUT Voltage 220/230/240 VAC Voltage range 162 - 290 VAC Frequency range 50Hz / 60Hz (auto sensing) OUTPUT Output voltage 220/230/240 VAC AC voltage regulation (batt. mode) ± 10% Frequency range (batt. mode) 50Hz / 60Hz ± 1Hz Transfer time Typical 2-6 ms, 10 ms max. Waveform (batt. mode) Simulated Sinewave BATTERY Battery type & number 12V / 9Ah x 2 Typical recharge time 4-6 hours recover to 90% capacity PROTECTION Full protection Overload, discharge and overcharge protection INDICATORS LCD display AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault and Low Battery LED display AC Mode Green lighting Battery Mode Yellow flashing Fault Red lighting ALARM Battery mode Sounding every 10 seconds Low battery Sounding every seconds Overload Sounding every 0.5 seconds Fault Continuously sounding PHYSICAL Dimension (mm) HxWxD 182x130x320 Net weight (kg) 10.6 ENVIRONMENT Humidity 0 - 90% RH @ 0°C - 40°C (non-condensing) Noise level < 40 dBA MANAGEMENT Optional USB/RS-232 Port Supports Windows 2000/2003/XP/Vista/2008,Windows 7, Linux, Unix and Mac

GENERAL SPECIFICATIONS • 650VA / 1000VA / 1500VA / 2000VA line interactive UPS • Built-in super smart charger, shorten 50% of charging time • Excellent microprocessor control guarantees high reliability • Boost and buck AVR for voltage stabilization • Auto restart while AC is recovering • Simulated sine wave output • Off-mode charging • Cold start function • Optional USB/RS-232 communication port and RJ-11/RJ-45 protection • Offering LED and LCD panels for selections TECHNICAL SPECIFICATIONS MODEL Leo 1500A Capacity 1500VA / 900W INPUT Voltage 220/230/240 VAC Voltage range 162 - 290 VAC Frequency range 50Hz / 60Hz (auto sensing) OUTPUT Output voltage 220/230/240 VAC AC voltage regulation (batt. mode) ± 10% Frequency range (batt. mode) 50Hz / 60Hz ± 1Hz Transfer time Typical 2-6 ms, 10 ms max. Waveform (batt. mode) Simulated Sinewave BATTERY Battery type & number 12V / 9Ah x 2 Typical recharge time 4-6 hours recover to 90% capacity PROTECTION Full protection Overload, discharge and overcharge protection INDICATORS LCD display AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault and Low Battery LED display AC Mode Green lighting Battery Mode Yellow flashing Fault Red lighting ALARM Battery mode Sounding every 10 seconds Low battery Sounding every seconds Overload Sounding every 0.5 seconds Fault Continuously sounding PHYSICAL Dimension (mm) HxWxD 182x130x320 Net weight (kg) 10.4 ENVIRONMENT Humidity 0 - 90% RH @ 0°C - 40°C (non-condensing) Noise level < 40 dBA MANAGEMENT Optional USB/RS-232 Port Supports Windows 2000/2003/XP/Vista/2008,Windows 7, Linux, Unix and Mac

GENERAL SPECIFICATIONS • 650VA / 1000VA / 1500VA / 2000VA line interactive UPS • Built-in super smart charger, shorten 50% of charging time • Excellent microprocessor control guarantees high reliability • Boost and buck AVR for voltage stabilization • Auto restart while AC is recovering • Simulated sine wave output • Off-mode charging • Cold start function • Optional USB/RS-232 communication port and RJ-11/RJ-45 protection • Offering LED and LCD panels for selections TECHNICAL SPECIFICATIONS MODEL Leo 1000A Capacity 1000VA / 600W INPUT Voltage 220/230/240 VAC Voltage range 162 - 290 VAC Frequency range 50Hz / 60Hz (auto sensing) OUTPUT Output voltage 220/230/240 VAC AC voltage regulation (batt. mode) ± 10% Frequency range (batt. mode) 50Hz / 60Hz ± 1Hz Transfer time Typical 2-6 ms, 10 ms max. Waveform (batt. mode) Simulated Sinewave BATTERY Battery type & number 12V / 7Ah x 2 Typical recharge time 4-6 hours recover to 90% capacity PROTECTION Full protection Overload, discharge and overcharge protection INDICATORS LCD display AC Mode, Battery Mode, Load Level, Battery Level, Input Voltage, Output Voltage, Overload, Fault and Low Battery LED display AC Mode Green lighting Battery Mode Green flashing Fault N/A ALARM Battery mode Sounding every 10 seconds Low battery Sounding every seconds Overload Sounding every 0.5 seconds Fault Continuously sounding PHYSICAL Dimension (mm) HxWxD 182x130x320 Net weight (kg) 8.2 ENVIRONMENT Humidity 0 - 90% RH @ 0°C - 40°C (non-condensing) Noise level < 40 dBA MANAGEMENT Optional USB/RS-232 Port Supports Windows 2000/2003/XP/Vista/2008,Windows 7, Linux, Unix and Mac

MODEL TEOS 110 Rated Power 10000VA/9000W Nominal Voltage 208/220/230/240VAC Power factor ≥ 0.99 @ Nominal Voltage (100% load) Frequency range 46~54Hz or 56~64Hz OUTPUT Voltage Regulation ±1% Frequency range 46~54 Hz or 56~64 Hz (Synchronized Range) 50 Hz or 60Hz ± 0.1 Hz (Batt. Mode) Harmonic distortion ≤ 3 % THD (Linear Load) ≤ 5 % THD (Non-linear Load) Current Crest Ratio 3:1 Waveform (Batt. mode) Pure Sinewave EFFICIENCY AC mode 93% Battery mode 91% BATTERY Battery type 12V / 9AH Numbers 16-20 Typical recharge time 9 hours recover to 90% capacity DISPLAY LCD Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators COMMUNICATION Optional SNMP Power management from SNMP manager and web browser PHYSICS CHARACTERISTIC Dimensions (mm) HxWxD 688x190x442 Net weight (kg) 66 - 76 ENVIRONMENT Humidity 0-95% RH @ 0-40°C (non-condensing) Acoustic noise Less than 55dBA @ 1 Meter Less than 58dBA @ 1 Meter

MODEL TEOS 3000 Rated Power 3000VA/2700W Nominal Voltage 100/110/115/120/127VAC or 200/208/220/230/240VAC Power factor ≥ 0.99 @ Nominal Voltage (100% load) Frequency range 40-70 Hz (50/60 Auto-sense) OUTPUT Voltage Regulation ±1% Frequency range 47~ 53 Hz or 57 ~ 63 Hz (Synchronized Range) 50 Hz or 60Hz ± 0.5% (Batt. Mode) Harmonic distortion ≤ 3 % THD (Linear Load) ≤ 6 % THD (Non-linear Load) Current Crest Ratio 3:1 Waveform (Batt. mode) Pure Sinewave EFFICIENCY AC mode 90% Battery mode 88% BATTERY Battery type 12V / 9AH Numbers 6 Typical recharge time 4 hours recover to 90% capacity DISPLAY LCD Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators COMMUNICATION Optional SNMP Power management from SNMP manager and web browser PHYSICS CHARACTERISTIC Dimensions (mm) HxWxD 318x190x421 Net weight (kg) 27.6 ENVIRONMENT Humidity 20-90 % RH @ 0- 40°C (non-condensing) Acoustic noise Less than 50dBA @ 1 Meter

MODEL TEOS 2000 Rated Power 2000VA/1800W Nominal Voltage 100/110/115/120/127VAC or 200/208/220/230/240VAC Power factor ≥ 0.99 @ Nominal Voltage (100% load) Frequency range 40-70 Hz (50/60 Auto-sense) OUTPUT Voltage Regulation ±1% Frequency range 47~ 53 Hz or 57 ~ 63 Hz (Synchronized Range) 50 Hz or 60Hz ± 0.5% (Batt. Mode) Harmonic distortion ≤ 3 % THD (Linear Load) ≤ 6 % THD (Non-linear Load) Current Crest Ratio 3:1 Waveform (Batt. mode) Pure Sinewave EFFICIENCY AC mode 89% Battery mode 85% BATTERY Battery type 12V / 9AH Numbers 4 Typical recharge time 4 hours recover to 90% capacity DISPLAY LCD Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators COMMUNICATION Optional SNMP Power management from SNMP manager and web browser PHYSICS CHARACTERISTIC Dimensions (mm) HxWxD 220x145x397 Net weight (kg) 17 ENVIRONMENT Humidity 20-90 % RH @ 0- 40°C (non-condensing) Acoustic noise Less than 50dBA @ 1 Meter

MODEL TEOS 1000 Rated Power 1000VA/900W Nominal Voltage 100/110/115/120/127VAC or 200/208/220/230/240VAC Power factor ≥ 0.99 @ Nominal Voltage (100% load) Frequency range 40-70 Hz (50/60 Auto-sense) OUTPUT Voltage Regulation ±1% Frequency range 47~ 53 Hz or 57 ~ 63 Hz (Synchronized Range) 50 Hz or 60Hz ± 0.5% (Batt. Mode) Harmonic distortion ≤ 3 % THD (Linear Load) ≤ 6 % THD (Non-linear Load) Current Crest Ratio 3:1 Waveform (Batt. mode) Pure Sinewave EFFICIENCY AC mode 88% Battery mode 83% BATTERY Battery type 12V / 9AH Numbers 2 Typical recharge time 4 hours recover to 90% capacity DISPLAY LCD Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators COMMUNICATION Optional SNMP Power management from SNMP manager and web browser PHYSICS CHARACTERISTIC Dimensions (mm) HxWxD 220x145x282 Net weight (kg) 9.8 ENVIRONMENT Humidity 20-90 % RH @ 0- 40°C (non-condensing) Acoustic noise Less than 50dBA @ 1 Meter

TUNCMATIK NEWTECH PRO II X9 1KVA 1/1 ON-LINE UPS LCD/TSK5303/UPS

General Properties Product Code TSK5306 EAN Code 8697842805560 Series description Newtech Pro II Product description Newtech Pro II 2 kVA Capacity / Power 2 kVA / 1800 W Display LCD Panel Alarm Battery mode, Low battery, Over load, Error Input Nominal voltage 200 / 208 / 220 / 230 / 240 VAC Voltage range Low voltage transfer @100%-80% load 160 VAC ±5%, @80%-70% load 140 VAC ±5%, @70%-60% load 120 VAC ±5%, @60%-0% load 110 VAC ±5%, (<35°C) Voltage range Low voltage back transfer @100%-80% load 175 VAC ±5%, @80%-70% load 155 VAC ±5%, @70%-60% load 135 VAC ±5%, @60%-0% load 125 VAC ±5%, ( 110% transfer to by-pass in 3sec Current crest ratio 3/1 max Harmonic distortion ≤3% THD (linear load)  ≤6% THD (non-linear load) Transfer time Line Battery 0 msec Transfer time Inverter By-pass 4 msec (typical) Waveform (Battery mode) Pure sinewave Efficiency Line mode ~ 89% Battery mode ~ 87% Battery Type of battery 12V9AH Number of battery 4 Charge time Depends on external battery capacity Charge voltage 54.7 VDC ± %1 Charge current 1A Indicators & Alarm LCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, Fault conditions Alarm Battery mode, Low battery, Overload, Fault Dimensions & Weight D x W x H (mm) 399 x 144 x 209 Net weight (kg) 16.2 Environmental Operating temperature 0-40°C Humidity 20-90% RH (non-condensing) Noise level (audible) < 50 dBA, from 1m Management Smart RS-232 or USB Windows 98/2000/2003/XP/Vista/2008, Windows 7/8, Linux, MAC SNMP (Optional) Power management from SNMP manager and web browser Important Note Note Tuncmatik Inc. has the right to make changes without notice by the above features.Tuncmatik Inc. It is not responsible from the typographical errors.

• UPS-ის ტიპი: ხაზოვან-ინტერაქტიული (line-interactive) • დანიშნულება: საყოფაცხოვრებო • ბუდეების რაოდენობა: 2 • გამომავალი სიმძლავრე: 1000 VA / 600 W ქსელის შემავალი პარამეტრები • ნომინალური ძაბვა: 220 V • მინიმალური ძაბვა (220 V-იანი ბუდედან მუშაობის დროს): 162 V • მაქსიმალური ძაბვა (220 V-იანი ბუდედან მუშაობის დროს): 268 V გამომავალი პარამეტრები • ნომინალური ძაბვა: 220 V • სიხშირე: 50 Hz • გადართვის დრო: 2-6 მწ ელემენტების პარამეტრები • უწყვეტი დენის ძაბვა 12 V • ელემენტების საერთო მოცულობა: 9 Ah • დატენვის დრო: 6 სთ (ნომინალური მოცულობის 20%-დან 90%-მდე) პორტები • გამომავალი პორტები: 2 x Schuko CEE 7/7P დამატებითი მახასიათებლები • აკუმულატორის მუშაობის რეჟიმზე გადასვლის სიგნალი • ელემენტის დაცლის მანიშნებელი სიგნალი • გადატვირთვის უწყვეტი სიგნალი გარემოცვა • გარემო პარამეტრების სამუშაო დიაპაზონი: 0 - 40 °C • მოწყობილობის ზედაპირიდან 1 მ დაშორებით აკუსტიკური ხმაურის დონე: 40 dBA ფიზიკური პარამეტრები • ზომა: 278x100x143 მმ • წონა: 4,8 კგ https://www.be.ge/product-137518.html

General Properties Product Code TSK1717 EAN Code 8697842802040 Series description Digitech Pro Product description Digitech Pro 850 VA Capacity / Power 850 VA / 480 W Display LCD Panel Alarm Battery mode, Low battery, Over load, Error Input Voltage 220 / 230 / 240 VAC Voltage range 162-265 VAC Frequency 50 / 60 Hz ± 10% Output Voltage 220 VAC Voltage range ± 10% Frequency range (Synchronized) 50 / 60 Hz ± %4 Frequency range (Battery mode) 50 ± 0.25 Hz - 60 ± 0.3 Hz Transfer time 2 - 6 msec, 10 msec max. Waveform Simulated sine wave Battery Type & number of battery 12V 9Ah x 1 Charge time 4-6 hours for recharging up to 90% capacity Charge voltage 14.0 VDC Charge current 1.0 A Indicators & Alarm LCD indicator AC mode, Battery mode, Fault conditions Alarm Battery mode, Low battery, Overload, Fault Dimensions & Weight D x W x H (mm) 321 x 123.5 x 163.5 Net weight (kg) 5.1 Environmental Operating temperature 0-40°C Humidity 20-90% RH (non-condensing) Noise level (audible) < 40 dBA Management USB communication port Windows¨ 98/2000/2003/XP/Vista/2008, Windows¨ 7/8, Linux, MAC RJ11 protection port Phone - Modem Protection Important Note Note Tuncmatik A.S. has the right to make changes without notice by the above features. Tuncmatik Inc. It is not responsible from the typographical errors.